CLICK HERE TO SEE THIS PRODUCT IN THE E STORE!
CLICK HERE TO SEE THIS PRODUCT IN THE E STORE!
CLOSE UP OF GRAYLITE UNDER FIRE
The four pictures below are Black with Black Reflective on the surface
Black base with Red Topping
The fireplace below has Starfire and then Black was added after the fireplace surround was installed.
The fireplace below has Clear, Gold and Black. A little drywall and paint and here you have one cool fireplace!
The 2 pictures below have Bronze, Bronze Reflective, Black, Black Reflective and Pale Cobalt Blue Topper.
The fireplace below has Black and Black Reflective installed
CLICK HERE TO SEE THIS PRODUCT IN THE E STORE!
The custom fireplace below has a star burner and a very nice star opening
From the start......
to the finish
Very modern. The fireplace above has Gray, Gray Reflective, Black, and Black Reflective
The pictures below are of a Starfire base with Black Reflective on top.
The fireplace below has: Bronze and Reflective, Black and Reflective and Amber
CLICK HERE TO SEE THIS PRODUCT IN THE E STORE!
The fireplace below has a base of Black and Black Reflective with Fire Stones on top.
The fireplace below has Black, Black Reflective and ICE on top
The fireplace below is a very unique fireplace in Huntington Beach. Black , Black Reflective, Red Topper and Red Topping.
Click on any of the pictures below to how this was actually made.
Click on any of the pictures above to how this was actually made.
The fireplace below in in Lakeland, Florida and was installed by John Addison for his customer. The fireplace has one of our propane pan burners with a remote control. We built a brushed aluminum surround with out the inner glass per the customer request. The glass that was used was a Gray base glass with Black and Copper Ruby Red Topper on top.
As you can see the fireplace was not much to look at until we added our touch.
You be the judge, We think it turned out wonderful!
CLICK HERE TO SEE THIS PRODUCT IN THE E STORE!
The fireplace below belongs to Ross Barnett in Florida. This was a ventless propane installation. Ross built a front wave design and we built a special wedge pan with the controls underneath. This is a remote control ventless burner. Great job Ross! The glass that was uses was:
Black and Black Reflective
Gray and Gray Reflective
Aquamarine Topper
Copper Blue Topper
Light Blue Tubes
Cobalt Blue Topper
Pale Cobalt Blue Topper
and here are the before and after pictures.
Above is before the wave
and below is the wave before out ventless burner was installed.
What makes us different from anyone else is that we allow you to exercise your imagination. If you see it, dream it, draw it, imagine it we can build it for you. Ross saw what we did for other customers and he came up with this very cool design for us to build for his family room, thanks Ross!
The fire pit below is again in Dallas, Texas and installed by Nadine. She used a Black base with Gray base glass, Gold base glass, Bronze Rust Copper base glass and a splash of Azurlite.
The fire table/ fire pit below is in Texas and was designed with our glass in mind to be installed and it has a Black base,
Purple Topper,
Black Luster Topper,
Rhubarb Topper,
and Bronze Topper.
The fireplace below is a propane fireplace with a Black base and Clear Diamonds on top. We built a pan to hold the glass with out the legs and covered/ protected the burner controls inside of the pan. The controls are on the right side and they are shielded and buried under the glass. The customer was going to finish the front of the steel pan after he installed it.
The fire pit below has a black Base with Black Reflective on top. Not too great of a fire pit picture but you get the idea. Even with Black as a base glass you will only see the color of glass under the fire. The flames don't change color nor does the glass, but the glass is what will reflect the light at night.
The fireplace below was assembled by Nadine in Dallas Texas (Elegant Reflections USA) Great job on the skull! The base glass is Starfire and Black base makes up the skull. She also used Clear Diamonds and Clear Crystals from our Toppers.
CLICK HERE TO SEE THIS PRODUCT IN THE E STORE!
You can see the Diamonds and Crystals around the outer edge for accents.
The fire pit below was built by Mark Showalter in Washington state.
He used:
Gray and Gray Reflective base glass,
Gray Pyrite,
Copper Ruby Red Topper,
and Black base glass mixed in.
This is the stone pot with the bottom up.
They drilled for the trimming valve to be installed.
A picture is worth a thousand words, and here you have it.
Below is a collection we took pictures for our customer to decide on which base to use under the Amber Diamonds.
Amber Diamonds alone
Amber Diamonds on Black
Amber Diamonds on Starfire
Amber Diamonds on New Yellow
Amber Diamonds on Bronze
The same product can be displayed thousands of ways. What do you want to see? Our diamonds are made with a convex base so when you look at the Diamonds in the fire they seem to be melting on the inside, like looking into a spoon. We cause it to reflect backwards. Visit out "Diamonds Page" to see many more colors!
The fire pit below was purchased locally and then we converted it to burn propane without soot! The colors used were:
Starfire,
Water White,
Bronze,
Azurlite,
Ford Blue,
Evergreen.
Galaxy green,
Black,
Gray
and topped with 1 lb of Copper Ruby Red Topper. I guess he wanted a lot of color.
Here is what is looked like when he started. These manufactures have no imagination!
This only cost about $100.00, complete!
CLICK HERE TO SEE THIS PRODUCT IN THE E STORE!
Search 
