Emerald Green 1417 Topping
ID code: Emerald Green 1417 Topping
Emerald Green 1417 Topping
This is a topping.
pit below has a 1/4" clear, 1/2" clear base with red orange topping,
emerald green topping and light sky blue topping. The was a basic wood
burning fire pit purchased locally and converted with our fire pit
propane kit (FPPK)
On this page (as if you needed another page) We are going to show you how to build a basic fire pit for your deck/ back yard.
This was built by Glenn Harvey of British Columbia.
This first picture is the frame he had started with.
You can make one from metal studs, aluminum studs, etc. Anything non flammable.
Wrap it with wonder board or durock/ cement board.
Below you can also wrap it with wire for better adhesion to the backer board.
This fire pit was natural gas. We also manufacture
the burners for propane. Well, we are the only ones who actually
manufacture propane burners for your projects.
Below you can see the gas connection coming up from
the deck. Glenn used a pan but he also could of used an aluminum/
stainless steel base plate as well.
The stacker stone is now being applied.
As you can see below the trimming valve is installed
on the side. You would be surprised on how many plumbers don't think of
this little detail, a valve to turn it on or off. I have seen the
valves installed inside of the pit or not even at all. You also need to be careful as to not have a gas line installed that is too small for the application.
Now the stone and cap are done, great and simple job!
Below you an see the larger filler lava rock was installed. If a flat plate were to have been used you wouldn't need the larger filler lava rock base.
Below our crushed lava was used to cover the larger lava rock to insure the glass does not fall through. This makes an even base. What ever shape you make the lava is the shape the glass will take.
Below we installed Water White base glass (32 lbs) for a 1 1/2" cover!
The stone on the side of the fire pit used was to match the stone on the house as well. Looks awesome!
Below is just the Water White before the colors were added.
The colors that were added are as follows:
Azurlite and Azurlite reflective for the sky area.
Brilliant Yellow R20F4 Topper for the sun center
Scarlett G072F3 Topping for the suns rays
Orange R140F4 Topper for the ring around the suns center
Emerald Green 1417 Topping for the bottom trees/ grass?
Deep Blue 2507 Topper mixed in around the Azurlite in the sky area.
If you notice below the center of the sun, it changes when it get hot! This one of our chameleons that
change when the glass gets hot. If you look real close at the Orange
Topper (next to the suns center) as well, it turns a bright cinnamon
red when it get hot also! All of our chameleons will be posted when we
get a chance. This is just another one of our product lines that we
have not had time to further promote.
Above is the fire burning and
below the fire was just turned off.
Glenn spent a few hours placing all of the glass to make this very cool scene. So don't just think you can just throw it on and it knows were to go. Very creative!