3/16" Clear
Clear and 2 lbs of Gold
Clear and Clear Pyrite
Clear Pyrite over Clear
Clear with high fire above
Low flame below
Clear base with Evergreen Reflective above and below.
clean and paint
and the final step, pour and light.
Clear base with Blue Green on top.
Below is a fire pit with a Clear base with Azurlite and Starfire on top
Above, this is how most fireplaces start
Below is a Clear base with a double burner
Again this is how most fireplaces look after you remove the doors and or screens
and below is a Clear base with Blue over the top
Below is a Clear base with Coral Orange Topping as a Topper
Above is a Clear base with Coral Orange Topping
The pictures below are of John Hanson in Northern California and he did a pan burner we provided and installed it himself.
A Clear base with 3/4" Clear on top
Here is how it all started
The bottom of the pan goes in
The top goes on and you light it
Now the glass
and now the magic
This is how the pan started
There you have it, simple as that. Great job John Hanson!
The 3 lower pictures have a Clear base with Ice on top. This fireplace also has a new surround frame that we now manufacture also found in the Surrounds page.
The fire place below has Clear. Azurlite and Azurlite Reflective.
The 2 pictures below are a Clear base with a dash or Plum Topping.
We are now starting a page for some of our television promotions we have sponsored this season.
The first is:
Zen-Inspired Master Bedroom
Here are a few pictures and the rest can be seen on the link above.
This fireplace has:
1/4 Clear, 1/4 Starfire, 1/2 Clear, 1/2 Starfire, Amber Topping and Topper, Red Topping and Topper and Pale Orange Topper
We will be posting several television spots as soon as we have the time.
The fireplace below has Clear, Gold and Black. A little drywall and paint and here you have one cool fireplace!
The fire pit below has Clear, Starfire, Amber Topping, Amber Topper and Dark Red Orange Topper.
The fire pit below has Clear with our very own ICE!
The fire pit below had Clear and one really cool flame effect!
This is in Etiwanda California
Here is a fireplace before and after with Clear and a splash of Ice
The fireplace below has Clear installed and had a double burner which was converted to a triple for more flame effect.
The fireplace below has Clear installed
The 4 pictures below are all Clear glass
The 6 pictures below show a self install with all glass using the original burner which didn't have a bad flame pattern. 1/8" Clear was used as a base and then Starfire was added to the surface saving money and it did look great. It's a simple as that.
This is in Yorba Linda California with a stainless steel surround and Clear glass.
The 2 fireplaces below are the same fireplace! This fireplace started out with a brick face and Clear glass
After a little black granite and some Clear Ice, we have a very nice fireplace!
This fireplace belongs to Carl Herkes
The fireplace below has a Clear base with Bronze on top
The fireplace below has Red and a Clear base
This next self install is a 10 picture install with :
Azurlite, Clear, Blue Green, Blue Green Reflective, Ice Clear, Ice Blue. Very nice fireplace.
The fire pit below has a Clear base with Azurlite and Ford Blue on top. Then it was topped with Dark Red Orange Topper, Yellow Amber Topper and Amber Topping.
This fire pit has Clear, Chunky Clear, Starfire and 1/2 Starfire and a water fall going into the fire, pretty cool!
The fireplace below has Clear, Gray, Black Clear Pyrite and Topped with 1/2" Starfire.
The fire pit below has a 1/4" Clear, 1/2" Clear base with Red Orange Topping, Emerald Green Topping and Light Sky Blue Topping. The was a basic wood burning fire pit purchased locally and converted with our fire pit propane kit (FPPK)
The fire pit below has a Clear base with 1/4" Starfire and 1/2" Starfire, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper and a little bit of ICE. The earth as the back yard and a lot of friends, wow!
This is a self install with a Clear base, Lagoon Topper, Pale Emerald Green Topper and Ice
above the burner goes in
below the lava goes on the burner. Then magically the lava disappears! We use the 2" method to save money not gouge the customer as we here this everyday how customers are taken by BS!
The fireplace below belongs to Todd. As you are going to see one great before and after transformation.
He used an 1/8" Clear base with Starfire on top. Then he added Red R Topper, Black Luster Topper and a few Clear Diamonds.
Out with the old and in with the new!
We would of liked more pictures of it burning but Oh Well!
The fire pit below (from Randy Cox) has a Clear base with Pale Cobalt Blue Topper and Aquamarine Topper for a simple but very nice fire pit.
Below you can see the larger 3/4"/ 1" crushed lava rock as a base filler.
Below you can now see our 1/4" crushed lava to finish off the larger lava.
The glass goes in and your finished!.
Randy installed a 22" stainless ring and when he took the picture he had the flame on low.
The next fire pit was build/ constructed by Rose Harms in Wyoming. Long story behind this one with what the plumbers were telling her and what actually happened. We will explain as we go.
Above and below you can see we had her install a gas line with a quick disconnect hose.
Here is what Rose had to say:
Hi Ed and Claudia,
Wanted to be sure I got the photos to you of our completed fire pit.
Here are the steps we went through:
Bought the brick/blocks (no lip on the stones) from Lowe's, put in circle, 3 rows high.
Bought the iron fire pit at Lowe's and placed on and inside fire pit. -note -it is iron, so I sprayed it with HIGH HEAT paint, in Copper. Wow!
got plumber to run natural gas from deck above (outlet for BBQ) and under the deck, ran down the deck post and he put in a Shut Off valve there.
It turns.
He ran a precise hole through the bottom off the fire pit to hold pipe for gas to the double ring burner (from Moderustic of course) and it is stainless
steel (no rust). At the bottom of the deck post is a flexible hose which goes over to the fire pit. It CAN be disconnected or even roll up and
shove inside fire pit (after it is cooled).
Note: you do need to chop off a piece of the block, or else just pull one out when you are using the
fire pit. (Kind of like Jenga -just pull out the stone, the others support the fire pit) Unless you can successfully saw off a piece of the stone.
Lit the burner to be sure it works well. It did.
We put in the 1" lava rock in the bottom of copper fire pit and then filled in the spaces with 1/4" lava rock. Should have used More! When we went to
cover the burner we were short on the fireglass. So we ordered more. Still looks beautiful.
Got rest of glass and made circles with the glass and it is beautiful. There are photos of it burning last night!! Lots of warmth on a typical
cool Wyoming evening.
Brick: $200, Fire Pit $79 on sale, double ring SS burner $126, glass -about $250, gas line -don't know yet but guessing $200. Maybe $750-800 total.
And -the way it is made, we could actually dismantle and move it. No mortar in stones. We are very happy with our fire pit and thanks to Ed and the gals
at Moderustic, we were able to make the right choice for glass and burner. Thanks Ed, Rebecca and Claudia. Very knowledgeable and helpful. Could not have managed
this without your guidance. We love being DYI-ers but directions are needed!! We appreciate all your help.
Rose and Doug Harms, Cheyenne Wyoming
Mind that the customers stacked their own bricks!
The glass that was used:
Clear base,
Sky Blue base glass,
Ford Blue base glass,
Ford Blue Reflective base glass,
and the rest is history!
This was originally going to be propane but if you have natural gas, then use it if you can. It will cost less in the long run.
The fire pit below was built and designed by Brett Parks in Indiana. Brett came to us to help hm create his water fire feature for his back yard and be able to winterize it during their frigid winters. The glass he used was a:
Clear base glass,
E.D Scarlett Diamonds,
E.D. Clear Diamonds.
We then built a custom shape stainless steel burner to fit his idea. We will explain as we go.
Here is his original concept drawing:
Below is his layout with pavers, electrical and gas line coming up.
6" deep water tank.
Stack a few more pavers.
Let's test it!
A custom size and configuration ring was fabricated.
Now your done!