We can build any size, shape, material you can design or dream of. We are the only company in the world offering custom tailor made propane burners fit to your needs and or designs.
Burners don't come with the copper pan.unless specified.
The fireplace below is a propane fireplace with our propane pan burner and the glass that was use is:
1/4" Clear White base glass
1/4" Clear Chunky
1/2" Clear Chunky
and 2 lbs of Platinum
From beginning to end.
This was a custom size pan because of the smaller size of the fireplace, but we can build anything.
The fireplace below is a propane burner, self installation with the 2" method, Starfire and Gold on top
Above we have the old burner with a smaller flame pattern which we will change to a double burner in our tray propane pan burner
A little bit of cleaning with a wire brush and 1200 degree paint
We filled the bottom with pea gravel and the covered it with sand
Then we installed the propane burner and filler it with pea gravel to the top of the burners
You can see the pilot light and thermo-coupler exposed
So there it is. A clean burning propane burner, 2" method, no soot, no smells, no carbon monoxide and it puts out a tremendous amount of heat. We sell the 2" method because it works and if anyone tries to tell you different, they need your money more than you do. We are the only company building propane burners for glass that don't soot or smell!
The vent less burner below is 1 of 3 that were sent to Georgia. The glass that we tested was Multi Mix. We show the burner finished, with the burners exposed, burning and with glass, We will post the pictures of the finished fireplace when the customer send them to us to post. This is a propane vent less burner and these also are made in natural gas as well.
Notice the stainless box tray underneath the upper pan.
If you dream it, design it, think of it, we can build it as we are the innovators in the industry which seem to some how give licence for most to try to copy us and our products and designs. What is important that you know who we are!
The vent less burner below is made of steel and there were actually 4 of these made. We covered the front and sides with 5" skirts. There are being installed in Georgia and as soon as they send pictures we will post them These pictures were taken just after the testing. This is a propane vent less burner and these are available in natural gas as well.
The pictures below are of the same burner as above with Azurlite installed. These 4 ventless burners are being installed in Georgia.
The skirts will hide the the valves and the remote control will be moved to the side of the fireplace. This was a vent less burner the customer sent to us for conversion and they asked for us to add a remote to all 4 vent less burners
The fire pit/ table is at the Roxbury Hotel and we will show you the progress here from beginning to end. This was a propane installation with our FPPK burner. The colors used were:
1/4" Starfire, 1/2" Starfire, Gold, Lime Green Topper, Pale Olive Green Topper, Olive Green Topper,a little bit of wood and tile and here you go!
Above shows the framing and the gas line coming in.
Below shows the pipe coming out of the floor and the thermo-coupler on the glass next to the igniter
Roxbury Hotel, a cool fire pit!
These fire pits below are in Mexico at the 4 Seasons Resort which we supplied the product. But they didn't listen when we told them about propane and how to install it correctly! This is a result of male ego and I can do it myself better! NOT! The second mistake was a SCREEN under the glass as this can and will trap gases which will cause woofing. A small fire ball every few minutes which can scare the crap out of you and every one around the fire feature. If you don't like your neighbor, well anyway.
This has been fixed and now works and looks fine. We will post pictures as soon as they send us the new pictures. We can fix any issues created by d___ies, so please be careful on who is selling and or telling you what.
The 9 pictures below are of a steel propane vent less burner. We used the original burner and installed an air mixer under the pan to insure a clean burn. As you will see the thermo-coupler, pilot light and ODS (oxygen depletion sensor are intact). These pans can be made in any shape or material.
What ever burner you purchase with or without remote control, we can convert it for you. Propane or natural gas, vented, direct vent or vent less as shown.
The fireplace below is a propane self build and installed by Norm Oppliger in St. Louis. It has a 1/4" Starfire base with 1/2' Starfire on top and topping with:
Light Aquamarine Topper
Turquoise Blue Topper
Cerulean Blue Topping
Copper Blue Topper
Scarlett Topper
Ice Ice Ice
and a few of our Diamonds
one great propane self install Norm!
The fireplace below has a propane burner under all of the sand, Clear Ice and Black Luster Topper.
The fireplace below was installed by the customer (Kim Clark) with a remote control, propane burner manufactured by us and Topped with Starfire. The fireplace was transformed form an ordinary to work of art, nice job!
The picture below has the burner being tested
This is the remote control on the lower right with the pilot light assembly
We now have fire!
The round pan below is a propane pan with electronic ignition. This is a 36" aluminum pan with a 2" lip all around
The two pans below are stainless steel and are propane fueled with 415,000 BTU electronic ignitions each.
The fire pit below belongs to Mike DeVito in Northern California. When I saw his idea I was excited to help him create something new and wonderful. He took a very old mining cart in his front yard and we helped him convert it to a propane burning fire pit! Turned out pretty cool! Next he is getting a fire pit cover made to cover it from debris and who else knows what.
We use a FPPK (fire pit propane kit) with valves, thermo coupler, pilot light and air mixer. The glass that was use is:
Starfire base glass over a bed of crushed lava rock,
Yellow Amber Topper
Steel Blue Topper
Turquoise Blue Topper
Green Tubes
Copper Ruby Red Topper
Ice Ice Ice
and of course our Diamonds in Clear, Pink, Amber and Blue.
I think this is one really nice idea!
It is all supplied by this 20 lb propane tank
Here is the mining cart with the base plate installed with the burners
Here you see the controls, air mixer and thermo coupler and pilot light lines under the base plate
You can use a larger (3/4", 1" lava) as a base under our 1/4" crushed lava as this will save you a few dollars.
Now we pour on the crushed lava to keep the glass from sinking into the larger lava.
Add some Starfire
Splash a few colors
Have your spouse light it in case something should go wrong! (Just Kidding)
Again here are the first pictures we saw of the mining cart. Great Idea!
Mike, you did a great job!
The fireplace below is a propane fireplace. A bed of crushed lava was installed and a Clear base glass was used to cover it all up.
Step 1, paint it!
Step 2, cover the old brick!
Finish the face and floor, very nice!
Install the propane pan burner
Fill in and all around the pan with crushed lava rock.
On the left side you can see the gas connection which will soon be covered as well. On the right side the control cover will be covered as well. This propane pan burner was fitted with a remote control, radio frequency.
Now that your finished your ready for FIRE! Have your spouse lite it in the event they didn't follow the instructions! (just kidding again)!
The fireplace below is a propane fireplace with a Black base and Clear Diamonds on top. We built a pan to hold the glass with out the legs and covered/ protected the burner controls inside of the pan. The controls are on the right side and they are shielded and buried under the glass. The customer was going to finish the front of the steel pan after he installed it.
Our products do not require any certification from the AGA, CSA or UL as it is considered a stand-alone product by these agencies. We are told that we would need a certification if sand and or lava rock would need certification. The agencies are franchise operations and they are privately owned and they are not a government agency. These agencies are hired for mass production testing and AGA, CSA and or UL do not certify custom one of a kind projects. Custom burners need no certification as this only applies to production equipment. Just so you can understand that a certification costs about $15,000.00 and certification was developed for production/ mass production to assure quality. Any parts that would normally need AGA or UL do in fact have these approvals. Parts with function need and should have some sort of approval. The pan burners we sell that do have UL, CSA and or any other listings are produced by other companies. The custom pan burners that we produce are just that, custom. Therefore do not require UL, CSA and or any other agency listings as these are custom. The parts that we use to build these pans are UL, CSA listed as they should be. We would never use any “Third World Country” or any unlisted, untested parts to build any products and or parts to endanger any product performance what so ever.
The fireplace below was installed with a dual battery operated 100,000 BTU propane electronic ignition system. Each capable of 100,000 BTU's of fire. The first pictures show what we had to work with and how it progressed.
The glass that was used was Starfire, Gold and Ice Ice Ice.
If this was in your house you would say NASTY!
Burning wood and logs is just nasty and dirty! True story!
Above you can see the soot that come out of the fireplace and and leaves your house smelling so carbon monoxide fresh! YUCK!
Add a bit of lime stone.
A few pieces of copper.
Below you can see the sand bed and the ignition box we built.
Below are the two vent we installed for the air mixers inside of the ignition systems.
and here we are finished. Now isn't that much better litter feller?
Modern times call for modern measures! I guess that's why we are Moderustic!
The burner below is one of our FPPK's (fire pit propane kit). With this FPPK we set it up for Black Magic! This was table tested for the pictures. Hopefully the customer will send us pictures after and during installation. We first sent these pictures for the customers approval. Here you go! The pan below belongs to Scott Spector and he finally installed the fire pit in his back yard, WOW, one really nice backyard!
This is one of our propane pan burner with slight modifications.
As you can see around the lower edges it was leaking and yes we did fix this.
The fire pit below was built by Scott Spector in Florida. He started with an FPPK 30 which includes a 30" base plate and a double 24" stainless steel ring. Here we go from the beginning:
The propane line was run/ installed under the pavers.
The colors that were used are
1/2" Clear base,
Black Magic in the center,
Clear Diamonds,
Cobalt Blue Topper,
Clear Topper,
Cobalt Blue Light Topper
and our FPPK 30". That is our 30" propane burner. You can see the actual burner above burning before shipment and installation.
We don't have any pictures of the fire pit burning at Scott's but he did tel us that when he fired it up again he would try to send us a few pictures. Thanks Scott.
The fire table below was built by Christina "Stina" in the San Francisco area. With a little ambition, imagination and our help, she now has one very nice fire table.
Here is where it started. She made a template of the pan and where the mounting tabs would be located. Then we built the aluminum pan and propane burner for Stina to install.
Below is how the teak table started. We just brought it into the future.
Below the pan was installed with Galaxy Green base glass.
Below you can see the top installed and what a difference.
Below is her wonderfully finished project, Great job Stina!
The fire pit below was purchased locally and then we converted it to burn propane without soot! The colors used were:
Starfire,
Water White,
Bronze,
Azurlite,
Ford Blue,
Evergreen.
Galaxy green,
Black,
Gray
and topped with 1 lb of Copper Ruby Red Topper. I guess he wanted a lot of color.
Here is what is looked like when he started. These manufactures have no imagination!
Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
"Utility Patent Applications now Published as of June 2005 and May 2006"
We are still in Patent Pending
We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public.
Please take note that in the United States reasonable royalties begin to accrue when a Patent publishes, (as ours has in June of 2005 and in May of 2006) depending on the state of the patent application at the time of issuance. Please take note that we do intend to enforce our patent rights to the furthest extent of the law upon issuance of our patent.
Patent publication available on request. Don't be fooled by look-a-likes or overly expensive imitations, ask for Aquatic Glassel by Moderustic. Be sure to get a price quote and you'll see the difference.
We are now designing a national catalog which should be 30 to 50 pages! We are asking for your help in acquiring pictures of fireplaces and fire pits for our catalog that our glass was used in. We would also appreciate your comments and or feed back as well. Please send your e mails and pictures to: Ed@Moderustic.com Jaunzemis@msn.com
Any questions please contact us at: Phone: 909 989 6129
Fax: 909 944 3811 E Mail: Ed@Moderustic.com
Stop by and visit our Showroom in Rancho Cucamonga: Moderustic Inc. 9467 Ninth Street #D Rancho Cucamonga, California 91730
CSLB# C-17 693887
We are 2 miles north of the Ontario Airport Hours: M-F 8:00 to 6:00 Every Saturday 10:00 to 2:00. After hours appointments available on request. If you're coming late, please call and we will wait. We usually stay until 6:00 pm.
We at Moderustic and Producers of Aquatic Glassel and the inventors of Fireplace Glass, are proud to offer the consumer over 500 products and we know we have spawned a few undesirable competitors in the market place but we continue on our quest for betterment and greater success through you the customer. We have been criticized for offering the crushed lava rock and or filler method by all of these other companies. But we understand the wants and needs of the customer, you. Spend less and get more. Some of these companies are telling the consumer to not use filler, why? They only want to fill their pockets with your money and we want you to save money. We know we have devastated these companies with our filler saving methods but it is with the best intentions for the consumer in mind. We have refused to sell to these individuals and companies because of their business practices. So please understand their intentions when they want you to purchase more glass. We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public and they will find their business in ruin. If you are a previous or new customer and would like to add your comments on these companies or your experience, we will post a testimonial page for these to be read by the public. If you would like to post just your comments, they are welcome as well. Again, we work for the consumer and not the competition.
Moderustic Return Policy
Moderustic Inc Return Policy and Legal Notices • Returns must be made within 30 days of purchase with exceptions only by management. • Returned products must be unused and/ or unmixed. • Returned products must be packaged well to avoid damage in transit, OR YOU WILL BE RESPONSIBLE FOR THE DAMAGE. • Returned products that are damaged in transit will not be able to be refunded. • Refunds will be made towards product cost only. • Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.) • Restock fees may apply depending on which items are being returned. (10% to 70%) • Refunds are processed after customer’s review and acceptance of refunded amount. • Refunds take approximately 1 week for processing less any customer delays. • Any return must have a return authorization in writing by the management and this will be noted. • There are no returns or refunds on any custom metal products what so ever! • We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom built or designed items are not returnable for any reason. • Any Designs, Drawings, PDF Files, Ideas, Pictures, Attachments, Renderings, Facsimiles, Faxes, Blue Prints, Copies, Documents and even copy written materials once sent to Moderustic Inc, Ed Jaunzemis, Aquatic Glassel or any employee of Moderustic Inc becomes property of said company to use, distribute, copy, reproduce, manipulate, recreate, modify, advertise, promote, lay claim to and or use in our discretion as we need. If you do not agree with these terms then please do not send us anything. Our intentions are to create for you the "Customer" and it is our vast collection of material that will spawn an idea for you to have us create something for you. If we should create something/ anything for you that is one of a kind, you do not own any rights to this or there idea or ideas, product or concept in any way shape or form. • EXPEDITED SHIPPING NOTICE (i.e. 2/ 3-Day Select, Next Day/ 2nd Air, etc.): If UPS/ FedEx fails to deliver your packages within the expedited delivery time frame you have chosen, they can or will refund a PORTION of the delivery charges. We will pass 100% of the UPS/ FedEx refund back to you. The amount refunded is determined by UPS/ FedEx and will be less than the original expedited shipping charge that you originally paid. This is due to surcharges and fuel charges. We do not determine what will be credited back.
Moderustic Inc Ed Jaunzemis, President 9467 9th Street Suite D Rancho Cucamonga, California 91730 Phone 909 989-6129 Fax 909 944-3811
