Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces
Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces

E-Store ALL OF THE GLASS PRICING SHOWN IS PER POUND : Azurlite Base Glass

View Cart

Sub-Categories:
Products:

1/8" Azurlite Base Glass

"18

"18

"18

"azur

"azurlite1""azurlite2"

"14"azurlite3"

"bruce3"

CLOSE UP OF AZURLITE UNDER FIRE

"bruce2"

"colorado

"colorado

"colorado

Azurlite in Colorado

"new

"new

"capo

Before Azurlite

"capo

After Azurlite

"CIMG0652"

Azurlite with starfire above

"DSCF0372"

Below is a fire pit with a clear base with azurlite and starfire on top

"cary"

"cary"

"cary"

"clear

Again this is how most fireplaces look after you remove the doors and or screens

and below is a clear base with blue over the top

"clear

"clear

"clear

Fire Pit below with ford blue and azurlite

"fire

"fire

"fire

"fire

The fireplace below has azurlite with ice as a topper.

This was a 2" installation with lava rock and sand as a base.

"pv"pv

"pv"pv

"pv"pv

The fire place below has clear. azurlite and azurlite reflective.

"fire"fire

"fire"fire

The fire pit below has starfire and azurlite in the center and topped with more starfire. This fire pit has a 6" band of white rock all around the edge. This way uses less glass and costs less.

"lavovva

The table below is in Chicago

"azurlite"azurlite

"azurlite"azurlite

The stainless steel tray below has azurlite in the tray. A very clean and simple look.

"marble

The fire pit below has a clear base with azurlite and ford blue on top. Then it was topped with Dark Red Orange Topper, Yellow Amber Topper and Amber Topping.

"mast

"mast

"mast

The fire pit below is in Boise! It has

Evergreen and Reflective

Azurlite and Reflective

Ford Blue and Reflective. Looks great.

"boise

"boise

"boise

"boise

Makes me want to go to Boise!

The fireplace below is a vent less with a steel pan and a stainless face added to cover the controls. The glass is azurlite with ice ice ice. Ahhhhh the beauty of no logs! Really!

Can you honestly say logs look good?
The fireplace below is in San Diego, California and the colors used were:
Cobalt Blue Topper
Steel Blue Topper
Cranberry Pink Topping
Purple Topper
Lilac Topper
Deep Royal Topping
Clear Base
Solex and Solex Reflective
Azurlite and Azurlite Reflective
Blue Green and Blue Green Reflective
and a little bit of Ice Ice Ice on top
wow!
The end pictures show that the burner was too close the wall which was an easy fix by moving the burner forward.
"diana"diana
"diana"diana
"diana"diana
"diana"diana
"diana"diana
This is where is went a little bit wrong, oops. We just had them move the burner forward and now its fine and the back wall was repainted.
"diana"diana
The fire pit below has azurlite, azurlite reflective, ford blue and ford blue reflective installed.
"walburg"walburg
"walburg"walburg
"walburg"walburg
"walburg"walburg
"walburg"walburg
The fire pit below has azurlite, azurlite reflective, ford blue and ford blue reflective installed.
"walburg"walburg
"walburg"walburg
"walburg"walburg
"walburg"walburg
"walburg"walburg

The fireplace below has a starfire base with black, azurlite, azurlite reflective and a lot of work. Very nice!

"union

 

On this page (as if you needed another page) We are going to show you how to build a basic fire pit for your deck/ back yard.
This was built by Glenn Harvey of British Columbia.
This first picture is the frame he had started with.
You can make one from metal studs, aluminum studs, etc. Anything non flammable.
"GlennHarvey
Wrap it with wonder board or durock/ cement board.
"GlennHarvey
Below you can also wrap it with wire for better adhesion to the backer board.
"GlennHarvey
This fire pit was natural gas. We also manufacture the burners for propane. Well, we are the only ones who actually manufacture propane burners for your projects.
Below you can see the gas connection coming up from the deck. Glenn used a pan but he also could of used an aluminum/ stainless steel base plate as well. 
"GlennHarvey
The stacker stone is now being applied.
"GlennHarvey
As you can see below the trimming valve is installed on the side. You would be surprised on how many plumbers don't think of this little detail, a valve to turn it on or off. I have seen the valves installed inside of the pit or not even at all. You also need to be careful as to not have a gas line installed that is too small for the application.
"GlennHarvey
Now the stone and cap are done, great and simple job!
"GlennHarvey
"GlennHarvey
Below you an see the larger filler lava rock was installed.  If a flat plate were to have been used you wouldn't need the larger filler lava rock base.
"GlennHarvey
Below our crushed lava was used to cover the larger lava rock to insure the glass does not fall through. This makes an even base. What ever shape you make the lava is the shape the glass will take.
"GlennHarvey
Below we installed Water White base glass (32 lbs) for a 1 1/2" cover! 
"GlennHarvey
The stone on the side of the fire pit used was to match the stone on the house as well. Looks awesome!
"GlennHarvey
Below is just the Water White before the colors were added.
"GlennHarvey
The colors that were added are as follows:
Azurlite and Azurlite reflective for the sky area.
Brilliant Yellow R20F4 Topper for the sun center
Scarlett G072F3 Topping for the suns rays
Orange R140F4 Topper for the ring around the suns center
Emerald Green 1417 Topping  for the bottom trees/ grass?
Deep Blue 2507 Topper mixed in around the Azurlite in the sky area.
"GlennHarvey
If you notice below the center of the sun, it changes when it get hot! This one of our chameleons  that change when the glass gets hot. If you look real close at the Orange Topper (next to the suns center) as well, it turns a bright cinnamon red when it get hot also! All of our chameleons will be posted when we get a chance. This is just another one of our product lines that we have not had time to further promote.
"GlennHarvey
Above is the fire burning and
below the fire was just turned off.
Glenn spent a few hours placing all of the glass to make this very cool scene. So don't just think you can just throw it on and it knows were to go. Very creative!
"GlennHarvey
 

 

Price: $7.75

[View Details or Buy Now]


1/4" Azurlite Base Glass.
1/4 Azurlite
1/4 Azurlite

1/4 Azurlite

14 azurlite 3

14 azurlite 2

14 azurlite 1

 

azur 10

azurlite1azurlite2

14 azurliteazurlite3

bruce3

CLOSE UP OF AZURLITE UNDER FIRE

bruce2

colorado 1

colorado 2

colorado 3

Azurlite in Colorado

new pit 1

new pit 2

capo 3

Before Azurlite

capo 1

After Azurlite

CIMG0652

Azurlite with Starfire above

DSCF0372

Below is a fire pit with a Clear base with Azurlite and Starfire on top

cary

cary

cary

clear and b ref 1

Again this is how most fireplaces look after you remove the doors and or screens

and below is a Clear base with Blue over the top

clear and b ref 2

clear and b ref 3

clear and b ref 4

Fire Pit below with Ford Blue and Azurlite

fire pit 8

fire pit 9

fire pit 10

fire pit 11

The fireplace below has Azurlite with Ice as a Topper.

This was a 2" installation with lava rock and sand as a base.

pv 1pv 1a

pv 2pv 2a

pv 3pv 3a

The fire place below has Clear. Azurlite and Azurlite Reflective.

fire 1fire 2

fire 3fire 4

The fire pit below has Starfire and Azurlite in the center and Topped with more Starfire. This fire pit has a 6" band of white rock all around the edge. This way uses less glass and costs less.

lavovva lee

The table below is in Chicago

azurlite 1azurlite 2

azurlite 3azurlite 4

The stainless steel tray below has Azurlite in the tray. A very clean and simple look.

marble fireplace tray

The fire pit below has a Clear base with Azurlite and Ford Blue on top. Then it was Topped with Dark Red Orange Topper, Yellow Amber Topper and Amber Topping.

mast 1

mast 2

mast 3

The fire pit below was a traditional lava rock fire pit

23

Now filled with lava rock (crushed 1/4" 3/8") over 3/8" 1/2" crushed. Remember the larger is under the smaller to keep the glass from falling through.

45

Above a flex line was installed to raise the ring to the surface. You don't want to leave the ring at the bottom unless you want an explosion or if you want to get rid of the significant other.

Below

Pour more crushed lava to make the desired shape of the fire pit and test burn for flame pattern.

67

Starfire base and a few other colors were added

Azurlite, Scarlet Topper, Red Topping, Ice, Copper Blue Topper, Copper Blue is a chameleon as when it gets hot it turns green and when it cools it turns back to blue!

89

Patterns, can you do better?

Pretty creative!

1011

1213

1415

Great job and very creative.

1617

The fire pit below is in Boise! It has

Evergreen and Reflective

Azurlite and Reflective

Ford Blue and Reflective. Looks great.

boise 1

boise 2

boise 3

boise 4

Makes me want to go to Boise!

The fireplace below is a vent less with a steel pan and a stainless face added to cover the controls. The glass is Azurlite with ice ice ice. Ahhhhh the beauty of no logs! Really!

Can you honestly say logs look good?
The fire pit below has a Clear base, and 3 lbs of each of the following, Starfire, Azurlite Reflective, 1/2" Bronze, 1/4 Bronze, Evergreen Reflective, Gold, Black Reflective.
mm 1mm 2
mm 3mm 4
mm 5mm 6
mm 7mm 8
The fireplace below is in San Diego, California and the colors used were:
Cobalt Blue Topper
Steel Blue Topper
Cranberry Pink Topping
Purple Topper
Lilac Topper
Deep Royal Topping
Clear Base
Solex and Solex Reflective
Azurlite and Azurlite Reflective
Blue Green and Blue Green Reflective
and a little bit of Ice Ice Ice on top
wow!
The end pictures show that the burner was too close the wall which was an easy fix by moving the burner forward.
diana 8diana 9
diana 10diana 7
diana 6diana 5
diana 4diana 3
diana 2diana 1
This is where is went a little bit wrong, oops. We just had them move the burner forward and now its fine and the back wall was repainted.
diana 11diana 12
The vent less burner below is made of steel and there were actually 4 of these made. We covered the front and sides with 5" skirts. There are being installed in Georgia and as soon as they send pictures we will post them These pictures were taken just after the testing. This is a propane vent less burner and these are available in natural gas as well.
vent less 1vent less 2
vent less 3vent less 4
vent less 5vent less 6
vent less 7
The pictures below are of the same burner as above with Azurlite installed. These 4 vent less burners are being installed in Georgia.
v 5v 7
v 8v 9
v 10v 11
v 12v 6
v 13
The skirts will hide the the valves and the remote control will be moved to the side of the fireplace. This was a vent less burner the customer sent to us for conversion and they asked for us to add a remote to all 4 vent less burners
The fire pit below has Azurlite, Azurlite Reflective, Ford Blue and Ford Blue Reflective installed.
walburg 1walburg 2
walburg 3walburg 4
walburg 5walburg 6
walburg 7walburg 8
walburg 9walburg 10

The fireplace below has a Starfire base with Black, Azurlite, Azurlite Reflective and a lot of work. Very nice!

union city

The fireplace below has Evergreen and Reflective, Emerald Green Topper, Pink Rosa, Azurlite, Cobalt Blue Topper, Olive Green Topper, Green Diamonds and Blue Tubes Toppers. They had use their existing pan burner which was a double burner and worked out just fine. c 01c 3

c 1
The fireplace below has Azurlite base glass with Dark Red Orange and Yellow Amber on top.
susan 1
susan 2

 

 

The fire pit below has a Clear base glass,
Cobalt Blue Topper,
Copper Blue Topper and
Azurlite base glass for one very nice fire pit and back yard!
fire pit 3
fire pit 2
fire pit 1

 

The fireplace below is in Palm Springs, California and is a self install
ps azurlite 1
Clean and paint the walls in the color of your choice, we offer 25 colors! 
ps azurlite 2
Screw on the flex line adapter 
ps azurlite 3
Attach the flex line and burner with the flex line under the burner. 
ps azurlite 4
Test the burner to insure the flames are not hitting the back wall. 
ps azurlite 5
Pour on the glass, with or with out filler (sand or crushed lava rock)  
ps azurlite 6
ps azurlite 7
and your done! 
ps azurlite 8
ps azurlite 9
ps azurlite 10
 
The fireplace below was installed by George Foote who also built his own pan, great job! We supplied the burners and glass and George supplied the talent and labor. Great job George! The colors used were:
Starfire base glass,
Azurlite,
Azurlite Reflective,
Gray base glass,
and our Ice Ice Ice and you be the judge!
Before the pan and glass.
george 1
Here is the stainless steel pan that George built.
george 2
Start with Starfire.
george 3
Add some Azurlite.
george 4
george 5
and the rest of the colors for one nice design from George!
george 6
george 7
george 8
george 9
george 10
 
 

On this page (as if you needed another page) We are going to show you how to build a basic fire pit for your deck/ back yard.
This was built by Glenn Harvey of British Columbia.
This first picture is the frame he had started with.
You can make one from metal studs, aluminum studs, etc. Anything non flammable.
GlennHarvey 1
Wrap it with wonder board or durock/ cement board.
GlennHarvey 2
Below you can also wrap it with wire for better adhesion to the backer board.
GlennHarvey 4
This fire pit was natural gas. We also manufacture the burners for propane. Well, we are the only ones who actually manufacture propane burners for your projects.
Below you can see the gas connection coming up from the deck. Glenn used a pan but he also could of used an aluminum/ stainless steel base plate as well. 
GlennHarvey 3
The stacker stone is now being applied.
GlennHarvey 5
As you can see below the trimming valve is installed on the side. You would be surprised on how many plumbers don't think of this little detail, a valve to turn it on or off. I have seen the valves installed inside of the pit or not even at all. You also need to be careful as to not have a gas line installed that is too small for the application.
GlennHarvey 8
Now the stone and cap are done, great and simple job!
GlennHarvey 6
GlennHarvey 7
Below you an see the larger filler lava rock was installed.  If a flat plate were to have been used you wouldn't need the larger filler lava rock base.
GlennHarvey 9
Below our crushed lava was used to cover the larger lava rock to insure the glass does not fall through. This makes an even base. What ever shape you make the lava is the shape the glass will take.
GlennHarvey 10
Below we installed Water White base glass (32 lbs) for a 1 1/2" cover! 
GlennHarvey 11
The stone on the side of the fire pit used was to match the stone on the house as well. Looks awesome!
GlennHarvey 12
Below is just the Water White before the colors were added.
GlennHarvey 13
The colors that were added are as follows:
Azurlite and Azurlite reflective for the sky area.
Brilliant Yellow R20F4 Topper for the sun center
Scarlett G072F3 Topping for the suns rays
Orange R140F4 Topper for the ring around the suns center
Emerald Green 1417 Topping  for the bottom trees/ grass?
Deep Blue 2507 Topper mixed in around the Azurlite in the sky area.
GlennHarvey 14
If you notice below the center of the sun, it changes when it get hot! This one of our chameleons  that change when the glass gets hot. If you look real close at the Orange Topper (next to the suns center) as well, it turns a bright cinnamon red when it get hot also! All of our chameleons will be posted when we get a chance. This is just another one of our product lines that we have not had time to further promote.
GlennHarvey 15
Above is the fire burning and
below the fire was just turned off.
Glenn spent a few hours placing all of the glass to make this very cool scene. So don't just think you can just throw it on and it knows were to go. Very creative!
GlennHarvey 16

The fire pit below belongs to Chad Haupert. He used an Azurlite base with Azurlite Reflective on top. Then he created a star in the center using Bronze Rust Copper with and outline of Ice Ice Ice. We didn't get pictures of the complete pit nor of it burning. But it looks great!

CHAD HAUPERT 1

CHAD HAUPERT 2

CHAD HAUPERT 3

 
Price: $7.50

[View Details or Buy Now]


1/2" Azurlite Base Glass





The fire pit below was a traditional lava rock fire pit



Now filled with lava rock (crushed 1/4" 3/8") over 3/8" 1/2" crushed. Remember the larger is under the smaller to keep the glass from falling through.


Above a flex line was installed to raise the ring to the surface. You don't want to leave the ring at the bottom unless you want an explosion or if you want to get rid of the significant other. Below Pour more crushed lava to make the desired shape of the fire pit and test burn for flame pattern.




Starfire base and a few other colors were added Azurlite, Scarlet Topper, Red Topping, Ice, Copper Blue Topper, Copper Blue is a chameleon as when it gets hot it turns green and when it cools it turns back to blue!




Patterns, can you do better? Pretty creative!




Great job and very creative.

 

On this page (as if you needed another page) We are going to show you how to build a basic fire pit for your deck/ back yard.
This was built by Glenn Harvey of British Columbia.
This first picture is the frame he had started with.
You can make one from metal studs, aluminum studs, etc. Anything non flammable.
 

Wrap it with wonder board or durock/ cement board.
 

Below you can also wrap it with wire for better adhesion to the backer board.
 


This fire pit was natural gas. We also manufacture the burners for propane. Well, we are the only ones
who actually manufacture propane burners for your projects.
Below you can see the gas connection coming up from the deck. Glenn used a pan but he also could of used an aluminum/ stainless steel base plate as well. 

 


The stacker stone is now being applied.

 


As you can see below the trimming valve is installed on the side. You would be surprised on how many plumbers don't think of this little detail, a valve to turn it on or off. I have seen the valves installed inside of the pit or not even at all. You also need to be careful as to not have a gas line installed that is too small for the application.

 


Now the stone and cap are done, great and simple job!

 




Below you an see the larger filler lava rock was installed.  If a flat plate were to have been used you wouldn't need the larger filler lava rock base.

 


Below our crushed lava was used to cover the larger lava rock to insure the glass does not fall through. This makes an even base. What ever shape you make the lava is the shape the glass will take.


Below we installed Water White base glass (32 lbs) for a 1 1/2" cover! 

 


The stone on the side of the fire pit used was to match the stone on the house as well. Looks awesome!

 


Below is just the Water White before the colors were added.
The colors that were added are as follows:
Azurlite and Azurlite reflective for the sky area.
Brilliant Yellow R20F4 Topper for the sun center
Scarlett G072F3 Topping for the suns rays
Orange R140F4 Topper for the ring around the suns center
Emerald Green 1417 Topping  for the bottom trees/ grass?
Deep Blue 2507 Topper mixed in around the Azurlite in the sky area.
If you notice below the center of the sun, it changes when it get hot! This one of our chameleons  that change when the glass gets hot. If you look real close at the Orange Topper (next to the suns center) as well, it turns a bright cinnamon red when it get hot also! All of our chameleons will be posted when we get a chance. This is just another one of our product lines that we have not had time to further promote.
Above is the fire burning and
below the fire was just turned off.
Glenn spent a few hours placing all of the glass to make this very cool scene. So don't just think you can just throw it on and it knows were to go. Very creative!
 

 

Price: $10.50

[View Details or Buy Now]


1/4" Azurlite Reflective Base Glass.

14 azurlite r 3

14 azurlite r 2

14 azurlite r 1

 

The fire pit below is in Boise! It has

Evergreen and Reflective

Azurlite and Reflective

Ford Blue and Reflective. Looks great.

boise 1

boise 2

boise 3

boise 4

Makes me want to go to Boise!

The fire pit below has a Clear base, and 3 lbs of each of the following, Starfire, Azurlite Reflective, 1/2" Bronze, 1/4 Bronze, Evergreen Reflective, Gold, Black Reflective.
mm 1mm 2
mm 3mm 4
mm 5mm 6
mm 7mm 8
The fireplace below is in San Diego, California and the colors used were:
Cobalt Blue Topper
Steel Blue Topper
Cranberry Pink Topping
Purple Topper
Lilac Topper
Deep Royal Topping
Clear Base
Solex and Solex Reflective
Azurlite and Azurlite Reflective
Blue Green and Blue Green Reflective
and a little bit of Ice Ice Ice on top
wow!
The end pictures show that the burner was too close the wall which was an easy fix by moving the burner forward.
diana 8diana 9
diana 10diana 7
diana 6diana 5
diana 4diana 3
diana 2diana 1
This is where is went a little bit wrong, oops. We just had them move the burner forward and now its fine and the back wall was repainted.
diana 11diana 12

 

 

The fire pit below has Azurlite, Azurlite Reflective, Ford Blue and Ford Blue Reflective installed.
walburg 1walburg 2
walburg 3walburg 4
walburg 5walburg 6
walburg 7walburg 8
walburg 9walburg 10

 

 

The fireplace below has a Starfire base with Black, Azurlite, Azurlite Reflective and a lot of work. Very nice!

union city

 

The fireplace below is a Malm Carousel Fireplace ( www.MalmFireplaces.com ). We replaced the attempted dual burner which it was originally installed with with a simple 12" steel ring.
rose 1
This fireplace has a safety pilot light kit which was still left intact for local code reasons but we did get rid of the non functioning pan burners.
rose 3
Below we poured the crushed lava base up to and just covering the ring burner.
rose 4
Then we poured the Bronze Rust Copper over the ring and crushed lava rock.
rose 5
rose 6
With the doors closed just enough as you can see now they can control the hurricane/ tornado effect!
rose 7
Azurlite Reflective and Gold were added to the Bronze Rust Copper
rose 8
rose 9

 

 

 

The fireplace below is in Palm Springs, California and is a self install
ps azurlite 1
Clean and paint the walls in the color of your choice, we offer 25 colors! 
ps azurlite 2
Screw on the flex line adapter 
ps azurlite 3
Attach the flex line and burner with the flex line under the burner. 
ps azurlite 4
Test the burner to insure the flames are not hitting the back wall. 
ps azurlite 5
Pour on the glass, with or with out filler (sand or crushed lava rock)  
ps azurlite 6
ps azurlite 7
and your done! 
ps azurlite 8
ps azurlite 9
ps azurlite 10

 

The fireplace below was installed by George Foote who also built his own pan, great job! We supplied the burners and glass and George supplied the talent and labor. Great job George! The colors used were:
Starfire base glass,
Azurlite,
Azurlite Reflective,
Gray base glass,
and our Ice Ice Ice and you be the judge!
Before the pan and glass.
george 1
Here is the stainless steel pan that George built.
george 2
Start with Starfire.
george 3
Add some Azurlite.
george 4
george 5
and the rest of the colors for one nice design from George!
george 6
george 7
george 8
george 9
george 10
 
 
On this page (as if you needed another page) We are going to show you how to build a basic fire pit for your deck/ back yard.
This was built by Glenn Harvey of British Columbia.
This first picture is the frame he had started with.
You can make one from metal studs, aluminum studs, etc. Anything non flammable.
GlennHarvey 1
Wrap it with wonder board or durock/ cement board.
GlennHarvey 2
Below you can also wrap it with wire for better adhesion to the backer board.
GlennHarvey 4
This fire pit was natural gas. We also manufacture the burners for propane. Well, we are the only ones who actually manufacture propane burners for your projects.
Below you can see the gas connection coming up from the deck. Glenn used a pan but he also could of used an aluminum/ stainless steel base plate as well. 
GlennHarvey 3
The stacker stone is now being applied.
GlennHarvey 5
As you can see below the trimming valve is installed on the side. You would be surprised on how many plumbers don't think of this little detail, a valve to turn it on or off. I have seen the valves installed inside of the pit or not even at all. You also need to be careful as to not have a gas line installed that is too small for the application.
GlennHarvey 8
Now the stone and cap are done, great and simple job!
GlennHarvey 6
GlennHarvey 7
Below you an see the larger filler lava rock was installed.  If a flat plate were to have been used you wouldn't need the larger filler lava rock base.
GlennHarvey 9
Below our crushed lava was used to cover the larger lava rock to insure the glass does not fall through. This makes an even base. What ever shape you make the lava is the shape the glass will take.
GlennHarvey 10
Below we installed Water White base glass (32 lbs) for a 1 1/2" cover! 
GlennHarvey 11
The stone on the side of the fire pit used was to match the stone on the house as well. Looks awesome!
GlennHarvey 12
Below is just the Water White before the colors were added.
GlennHarvey 13
The colors that were added are as follows:
Azurlite and Azurlite reflective for the sky area.
Brilliant Yellow R20F4 Topper for the sun center
Scarlett G072F3 Topping for the suns rays
Orange R140F4 Topper for the ring around the suns center
Emerald Green 1417 Topping  for the bottom trees/ grass?
Deep Blue 2507 Topper mixed in around the Azurlite in the sky area.
GlennHarvey 14
If you notice below the center of the sun, it changes when it get hot! This one of our chameleons  that change when the glass gets hot. If you look real close at the Orange Topper (next to the suns center) as well, it turns a bright cinnamon red when it get hot also! All of our chameleons will be posted when we get a chance. This is just another one of our product lines that we have not had time to further promote.
GlennHarvey 15
Above is the fire burning and
below the fire was just turned off.
Glenn spent a few hours placing all of the glass to make this very cool scene. So don't just think you can just throw it on and it knows were to go. Very creative!
GlennHarvey 16
 

The fire pit below belongs to Chad Haupert. He used an Azurlite base with Azurlite Reflective on top. Then he created a star in the center using Bronze Rust Copper with and outline of Ice Ice Ice. We didn't get pictures of the complete pit nor of it burning. But it looks great!

CHAD HAUPERT 1

CHAD HAUPERT 2

CHAD HAUPERT 3

 

 

 

 

Price: $8.15

[View Details or Buy Now]


3/8" Azurlite



3/8" Chunky Azurlite




chunky blue green fire glasschunky blue green fire glasschunky blue green fire glass

Price: $7.60

[View Details or Buy Now]

Visit Our Original
E-STORE
Or Visit Our NEW
E-STORE!
 

We Make Fire Cool!

Moderustic is proud to have been issued 2 U.S. Patent Numbers
# 7,976,360 B2 (in reconsideration) and # 8,419,505 C1 and Patents pending!
covering our method of creating tumbled tempered glass for use in fireplaces and fire pits.
Patent Applications Published 2005, 2006 and 2014

 

Our Glass is SAFE and See Why!

Safe Glass
 We  Appreciate Your Comments & Feed Back. Please
Send Your E-mails or Click HERE to Submit a Survey!

Note* When calling for any technical support we ABSOLUTELY
require Digital photos from a camera not your phone.

(909) 989-6129  Fax: 909 944 3811 
or E-mail us at
Ed@Moderustic.com |  Jaunzemis@msn.com  


 
Need to know how much you need
 "HOW MUCH DO I NEED PAGE"
Our Crushed Lava can be purchased online
"JUST CLICK HERE"
Do you need a Burner?
 "JUST CLICK HERE"
Our Fireplace Paint can be purchased online
 "JUST CLICK HERE"

Stop by and visit our Showroom in Rancho Cucamonga:(just north of the Ontario Airport
Moderustic Inc.
9467 Ninth Street Suite #D
Rancho Cucamonga, California 91730
Hours: Monday-Friday 9:00 to 6:00 Closed Saturday and Sunday, Saturday by appointment only.

If you're coming late, please call us and we will stay late.  We are 2 miles North of the Ontario Airport
_________________________________________________________________
Moderustic Fabrication University
MODERUSTIC FABRICATION UNIVERSITY
Investment, Employee or Career Opportunities.
_________________________________________________________________


Copyright 2003 -2017 www.Moderustic.com All Rights Reserved. 
Copyright 2003 - 2017 www.AquaticGlassel.com All Rights Reserved.

Moderustic is proud to have been issued 2 U.S. Patent Numbers
# 7,976,360 B2 (in reconsideration) and # 8,419,505 C1 and Patents pending!
Covering our method of creating tumbled tempered glass for use in fireplaces and fire pits.
Patent Applications Published 2005, 2006 and 2014.


RETURN POLICY!

  • Shipping has become an issue so all orders will and must be signed for. No package will be left at your door unless you sign for it. This is called an indirect or direct signature request. It is also refereed to as a Signature service. If a package or packages are left at your door per your request, you will be the responsible party.
  • All returns must be made within 30 days of purchase with exceptions only by management
  • Returned products must be unused and/or unmixed
  • Returned products must be packaged well to avoid damage in transit, or you will be responsible for the damage
  • Returned products that are damaged in transit will not be able to be refunded
  • Refunds will be made towards product cost only
  • Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
  • Restock fees may apply depending on which items are being returned. (30% to 70%) Glass/ burning products 30%, Burners 50%, Custom Burners 70%, Metal Pans or any Custom Metal Work, Electronics are not returnable ever!
  • All returns must have a return authorization (we are not responsible for products being shipped to incorrect addresses due to non-compliance of this policy)
  • No returns or exchanges will be accepted for any custom metal products or electronics what so ever!
  • No returns will be accepted for ICS/ Fire Falls, or any other standard or custom fire pits.
  • No returns on products that contain electronics (if they were used or installed)
  • We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom built or designed items are not returnable for any reason. It is your responsibility to make sure our products do not violate your local building codes.  We cannot accept returns should you encounter these issues with your local building authorities.
  • Any Designs, Drawings, PDF Files, Ideas, Pictures, Attachments, Renderings, Facsimiles, Faxes, Blue Prints, Copies, Documents and even copy written materials once sent to Moderustic Inc, Ed Jaunzemis, Aquatic Glassel or any employee of Moderustic Inc becomes property of said company to use, distribute, copy, reproduce, manipulate, recreate, modify, advertise, promote, lay claim to and or use in our discretion as we need.  If you do not agree with these terms then please do not send us anything. Our intentions are to create for you the "Customer" and it is our vast collection of material that will spawn an idea for you to have us create something for you. If we should create something/ anything for you that is one of a kind, you do not own any rights to this or there idea or ideas, product or concept in any way shape or form.

To read all company policies, terms and conditions, CLICK HERE!





All of the pictures and content are copyright protected on this website: U.S. Copyright Registration No is: VA 1-650-624
Entitled: "Moderustic 1107" 
Effective registration date is February 1, 2008.
Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
CSLB# C-17 693887

# 7,976,360 B2 (in reconsideration) and # 8,419,505 C1 and Patents pending! -   

Violators will be prosecuted.

Note* When calling for any technical support we ABSOLUTELY (maybe)
require Digital photos from a camera not your phone (if that is all you have, then that's fine).

(909) 989-6129  Fax: 909 944 3811 
or E-mail us at
Ed@Moderustic.com |  Jaunzemis@msn.com  

_________________________________________________

Click HERE or on the Picture below to see our MOVIES!
Let's Go To The Movies
Click HERE or on the Picture above to see our MOVIES!

_________________________________________________________________

Check out the Car Garden, A fun car page by Ed

Car Garden

We now have a "FEW" Patents and a "FEW" Patents Pending. "We were the first to file" (yes we were), is why we have The Patents for FireGlass.

For any competitors out there, Second place is first looser. Sorry.

Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces